Tattoo machine maintenance methods

Tattoo machine maintenance methods

Friends who own cars in their daily lives will perform maintenance and inspections on their cars after some time to ensure that they can be used safely and smoothly. The tattoo machines we often use in tattooing also need to be maintained after a certain period of use. Xi'an Tattoo Shop believes that a good tattoo machine can not only complete the tattoo work smoothly but also make the user feel relaxed. Therefore, proper maintenance is very important. A tattoo machine is not only a working partner for a tattoo artist. In terms of value, a good tattoo machine can cost several thousand. Maintenance can also extend the life of the tattoo machine. The following is Xi'an Tattoo Shop will introduce you to the maintenance methods of tattoo machines.

    First of all, we need to know how to distinguish whether the tattoo machine can work normally. A good tattoo machine has a crisp sound and will not heat up after working for a long time. After using it for some time, we will find that the sound of the tattoo machine will become deeper the intensity will decrease, and it will not take long for it to heat up. The reason for this situation is due to the erosion and oxidation of the contacts of the tattoo machine due to dust and moisture in the air. Sometimes heat is caused by a sudden rise in current caused by poor contact between the pedals or hook wires, and the reason why the power of the tattoo machine decreases is because the elasticity of the shrapnel becomes smaller after being used for some time or due to poor contact. Penetration caused by these is one of the reasons why the tattoo machine cannot work properly. Knowing the reasons why the tattoo machine cannot work properly, we can perform targeted maintenance and repair of the tattoo machine. The maintenance process is generally divided into cleaning, replacement, and debugging. aspects.

    Xi'an Tattoo Shop recommends that when cleaning the tattoo machine, you use absolute alcohol to disassemble and clean the body and other parts. This can thoroughly clean the dirt and pigments attached to the surface of the tattoo machine. If the shrapnel and each terminal are not severely oxidized, they can be polished with fine sandpaper and wiped with an eraser. Generally, they can continue to be used. If the shrapnel needs to be replaced, you can return it to the manufacturer or purchase some special tools for adjustment and replacement, such as shrapnel adjusters and correction rods. The shock-absorbing ring also needs to be replaced frequently, otherwise it will cause the machine to resonate. During debugging, you can choose the strength and frequency that suits you according to the strength and sound of the tattoo machine.

🔗POSEIDON Tattoo Kit Very Durable

Reading next

Tattoo tutorial--Tricks of tattoo machine
The Reasons For The Short-Term Heat Generation Of Tattoo Machines

Leave a comment

All comments are moderated before being published.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.